Site icon Eat Chiken

Bayer Makrolon Polycarbonate Sheet are clear and tough

Featured Image by: CTSWebEngine

Makrolon Polycarbonate products have a balance of beneficial features which include temperature resistance, impact resistance and optical properties position polycarbonates between commodity plastics and engineering plastics.
Polycarbonate is definitely a long-lasting material. Whilst it has higher impact-resistance, it’s got lower scratch-resistance and thus a hard coating could be applied to polycarbonate eye protection lenses as well as polycarbonate exterior automotive components. The properties associated with polycarbonate are similar to those of common Acrylic materials, except polycarbonate is going to be stronger, it is usable in a wider temperature range and is a bit more expensive. This plastic polymer is highly transparent to visible light and has better light transmission characteristics than several types of glass.
Polycarbonate carries a glass transition temperature of around 150 °C (302 °F), as a result it softens gradually above this point and flows above about 300°C (572 °F). Tools will have to be held at high temperatures, generally above 80 °C (176 °F) for making strain- and almost stress free products.
Unlike most other thermoplastics, polycarbonate can undergo dramatic deformations without cracking or breaking. Because of that, it can be processed and formed   at room temperature using sheet metal techniques, such as forming bends with a brake. For even sharp angle bends with a tight radius, no heating is generally necessary. This makes it useful for prototyping applications where transparent or electrically non-conductive parts are necessary, which can’t be created from sheet metal. Understand that PMMA/Plexiglas, which happens to be similar in appearance to polycarbonate, but it is brittle and cannot be bent without heating.
Polycarbonate is often utilized in eye protection, along with other projectile-resistant viewing and lighting applications that would normally require the use of glass, but require higher impact-resistance. Many different types of lenses are manufactured from polycarbonate, including automotive headlamp lenses, lighting lenses, sunglass/eyeglass lenses, swimming and SCUBA goggles, and safety visors for use in sporting helmets/masks and police riot gear. Windscreens in small motorized vehicles are typically constructed from polycarbonate, such as for motorcycles, ATVs, golf carts, and small planes and helicopters.

performance plastic sheet

Orange County plastic sheet

Exit mobile version